DOCTER Sight III
While adhering to the advantageous tubeless method of construction, Analytik Jena AG presents the next generation of the successful DOCTER sight.
Due to its watertight monoblock housing of high-strength special aluminium, the DOCTER sight III ensures extreme robustness at heavy continuous utilization.
The lens system without magnification makes possible a two-eyed viewing of a full field of view and thus ensures a high degree of certainty when shooting.
The DOCTER multitop quality is a determining factor for high transmission in all light conditions. The reflex coating is situated inside the 2-lens optics and is therefore well protected against damage. There is a choice of 3 types of innovative electronic control. Thus the light point intensity can be even better suited to the application.
In addition, the brightness control can be adapted to the ambient light conditions with all types of operation.
- Minimal — Curve with lowest energy consumption
- Dynamik — Standard curve with balanced features
- Power — Increased basic brightness and high maximum brightness
Minimum power consumption ensures long battery life times. the integrated battery warning informs of the low energy condition of the lithium cell in good time. Because of the numerous mounting possibilities it can be quickly and professionally mounted on almost any weapon.
Mounting module for the DOCTER Sight II plus can be used without limitation for the DOCTER Sight III. cover width of light point (cm/100m)
|Elevation adjustment range
||± 3.6 m/100 m
|Windage adjustment range
||± 2.7 m/100 m
|Overlap measure in case of model
20 cm/1000 m (7.0 MOA)
|Parallax-free sighting distance
||Lithium coin cell CR 2032, 3 Volt
|Dimensions (length x width x height) (mm)
||46.0 x 25.4 x 24.3