The Redding Model 1400-XT Case Trimming Lathe uses a cast iron frame that has been extended to handle all the latest long action cartridges. The frame is cast iron because it is a perfect bearing surface, will not wear out and will maintain its precision and alignment for years of service.

• Universal collet fits all popular cases.
• TiN (Titanium Nitride) coated replaceable cutter.
• Six pilots - .22 cal., 6mm, .25 cal., .270 cal., 7mm and .30 cal.
• Two neck cleaning brushes (.22 thru .30 cal.)
• Large and small primer pocket cleaners.

The most noteworthy feature of the Model 2400 Case Trimming Lathe is the new Micrometer which adds precision and repeatability to the case length adjustment. Changes as little as .001" can be easily "dialed in".

The innovative new push button chuck lock simplifies loading and unloading while facilitating perfect alignment of the case and pilot. The design of the new push button chuck lock, combined with the extended cast iron frame of the Model 1400-XT, increases case length capacity; accommodating not only the latest long action cartridges but old time classics as well.

Redding "case trimming lathes" are the only case trimmers on the market that turn the case and not the cutter. This feature guarantees a perfectly square case mouth with every cut.

• New micrometer…easy adjustments of .001".
• Cast iron frame to maintain precision alignment.
• New push button collet chuck is ideally suited for use with optional power adapter.
• Handles 17 to 50 Cal, up to 3-1/4" case length.
• Universal collet fits all popular cases – no others to buy.
• TiN (Titanium Nitride) coated replaceable cutter.
• Storage holes for pilots.

Supplied with:

• Universal collet fits all popular cases.
• TiN (Titanium Nitride) coated replaceable cutter.
• Six pilots - .22 cal., 6mm, .25 cal., .270 cal., 7mm and .30 cal.
• Two neck cleaning brushes (.22 thru .30 cal.)
• Large and small primer pocket cleaners.

• Redding trim dies allow you to file trim your cases without unnecessary resizing. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming.
• For case forming and necking brass down from another caliber, Redding trim dies can be the perfect intermediate step before full length resizing. Pistol trim dies require extended shellholders.
• PLEASE STATE CALIBER WHEN ORDERING BY USING REDDING CATALOG TO IDENTIFY PRODUCT NUMBER

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf

• The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8" x 14 tpi threads will fit most popular reloading presses. Made in the USA.
• PLEASE STATE CALIBER WHEN ORDERING BY USING REDDING CATALOG TO IDENTIFY PRODUCT NUMBER

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf

• Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA.
• PLEASE STATE CALIBER WHEN ORDERING BY USING REDDING CATALOG TO IDENTIFY PRODUCT NUMBER

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf

• Redding Dies are produced under strict manufacturing processes to ensure the absolute highest quality die possible.
• Full length dies serve two functions. First, they size the entire length of the case, bringing it back into SAAMI specifications. In the same operation, they also remove the spent primer.
• These dies are made of quality steel, machined to tight tolerances, heat treated and polished. Made in the USA.
• PLEASE STATE CALIBER WHEN ORDERING BY USING REDDING CATALOG TO IDENTIFY PRODUCT NUMBER

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf

PLEASE STATE CALIBER WHEN ORDERING BY USING REDDING CATALOG TO IDENTIFY PRODUCT NUMBER

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf

The quality and accuracy of your reloaded ammunition depends largely on the quality of the equipment you use to assemble it.

Your choice of reloading dies should not be a casual one. Your dies literally shape the quality and function of your reloads. Because they are so important, we give them a lot of attention.

• We use the finest alloy steels obtainable.
• Our dies are machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry.
• This allows us to guarantee that they will produce ammunition that will p roperly fit any standard (SAAMI) chamber, re g a rdless of action type.
• To maintain tolerances and guarantee that your dies will last a lifetime, all Redding dies are heat treated in atmospherically controlled furnaces.
• Finally, your dies are hand polished for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged.
• The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin, hex wrench, and even a place for your shellholder!
• All Redding dies use the industry standard 7/8-14 threaded bodies.

PLEASE STATE CALIBER WHEN ORDERING BY USING REDDING CATALOG TO IDENTIFY PRODUCT NUMBER

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf

• We use the finest alloy steels obtainable.
• Our dies are machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry.
• This allows us to guarantee that they will produce ammunition that will p roperly fit any standard (SAAMI) chamber, re g a rdless of action type.
• To maintain tolerances and guarantee that your dies will last a lifetime, all Redding dies are heat treated in atmospherically controlled furnaces.
• Finally, your dies are hand polished for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged.
• The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin, hex wrench, and even a place for your shellholder!
• All Redding dies use the industry standard 7/8-14 threaded bodies.

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf

• We use the finest alloy steels obtainable.
• Our dies are machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry.
• This allows us to guarantee that they will produce ammunition that will p roperly fit any standard (SAAMI) chamber, re g a rdless of action type.
• To maintain tolerances and guarantee that your dies will last a lifetime, all Redding dies are heat treated in atmospherically controlled furnaces.
• Finally, your dies are hand polished for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged.
• The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin, hex wrench, and even a place for your shellholder!
• All Redding dies use the industry standard 7/8-14 threaded bodies.

• Redding Dies are produced using precise manufacturing processes along with the highest quality components available.
• Body dies are designed to full length size the case body and bump the shoulder position for proper chambering
• PLEASE STATE CALIBER WHEN ORDERING BY USING REDDING CATALOG TO IDENTIFY PRODUCT NUMBER

http://www.redding-reloading.com/images/stories/2017Pressinfo/2017_Redding_Catalog.pdf