• Trims most standard calibers from 0.171″ to 0.459″ – fits from 5.7 x 28 all the way to 45-70
• Includes both coarse and fine trim length adjustments that will maintain 0.001″ repeatability
• 0.490″ diameter Cutter Shaft (17 cal. Cutter Shaft required for 17 cal.)
• 5⅜” long Base
• Accommodates all six case trimmer accessories
• Plus, Forster manufactures the only Case Trimmer that holds the case in a Brown & Sharpe-type collet – keeping your trimming depth consistent, even when the rim diameter varies

The Original Case Trimmer requires a Collet and Pilot for each case, ordered separately. Collets #1 through #4 are compatible with the Original Case Trimmer.

• Accurate performance from your ammunition is absolutely dependent on uniformity of both the bullet and the case. Achieving that uniformity is not possible without an accurate, reliable measuring device. The Forster exclusive Co-Ax Case & Cartridge Inspector provides you with the ability to ensure uniformity by measuring three critical dimensions: neck wall thickness, case neck concentricity, and bullet runout.
• Measurements are in increments of one-thousandth of an inch so accuracy is superb. The Inspector is unique because it checks both the bullet and case alignment in relation to the centerline (axis) of the entire cartridge or case.
• Pilots sold separately. (The .17 caliber pilot is not compatible with this tool.)

• There are other primer seaters on the market, but none quite like our exclusive Forster Co-Ax Primer Seater. Unlike other seaters, ours is designed so the operator can eliminate all slop when working with a specific cartridge. That translates into perfect seating, reliable ignition and reduced misfires.
• No additional shell holders are required. The E-Z-Just jaws close to securely grip most modern rifle and pistol cases with a rim thickness of .045″ to .072″.
• Other features include a built-in primer flipper tray. Large and small primer tubes have an open slot and primers stack sideways for added safety.

• Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck, shoulder and body and expands the neck and removes the spent primer.
• Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the difference in this sizing die.
• Full Length Dies are available in more than 70 calibers, either individually or bundled with a seater die in the Bench Rest Die Set.

17 Rem, 204 Ruger, 22 Hornet, 22 BR, 22 PPC, 221 Fireball, 222 Rem, 222 Rem Mag, 223 Rem, 223 WSSM, 224 Wby Mag, 5.6 x 50 Rimmed, 220 Swift, 22-250 Rem, 240 Wby Mag, 243 Win, 243 WSSM, 6mm BR, 6mm Dasher, 6 mm PPC, 6mm Rem (244), 6mm XC, 6mm x 45 (6 x 223 Rem), 6 x 47 Lapua, 25-06 Rem, 25 WSSM, 257 Wby Mag, 257 Ackley (40°), 257 Roberts, 260 Rem (6.5-08), 6.5 x 47 Lapua, 6.5 Creedmoor, 6.5 Grendel, 6.5 – 284, 6.5 x 57 Mauser, 6.5 x 55 Swedish, 6.5 x 55 SKAN, 6.8 SPC, 270 Win, 270 Win Short Magnum (WSM), 270 Wby Mag, 7 x 64 Brenneke, 7mm – 08, 7 x 57 Mauser, 7mm BR Rem, 7mm Rem Mag, 7mm Rem Ultra Mag, 7mm Rem Short Action Ultra Mag, 7mm Win Short Mag, 7mm Wby Mag, 7mm STW, 280 Rem (7mm Exp. Rem), 284 Win, 7.62 x 54 Russian, 30 – 30 Win, 300 AAC Blackout, 300 Rem Ultra Mag, 300 Rem Short Action Ultra Mag, 300 Norma Mag, 300 Win Mag, 300 Win Short Mag (WSM), 300 Wby Mag, 30 – 378 Wby Mag, 303 British, 308 Win, 308 National Match, 308 Small Base, 30 – 06, 325 Win Short Mag (WSM), 8 x 57 Mauser, 8 x 68S, 338 Norma Mag, 338 Win Mag, 340 Wby Mag, 338 Lapua Mag, 375 H & H, 375 Rem Ultra Mag

• The Bench Rest Neck Sizing Die reduces the outside case neck diameter, removes the spent primer and expands the inside case neck diameter.
• For reloaders who choose to retain the fire formed dimensions of their cases rather than resizing the entire case, neck sizing-only dies fit a definite need. Although they only work the necks of cases, they do eliminate some problems associated with excessive headspace.
• Neck sizing can also prolong case life. Neck sizers are available in a variety of calibers.
• The exclusive elevated “E-Z” Out Expander Ball system makes the difference in this sizer die.

222 Rem, 223 Rem, 223 WSSM, 220 Swift, 22 / 250 Rem, 243 Win, 243 WSSM, 6mm BR, 6mm P.P.C. Sako USA, 25 – 06 Rem, 257 Roberts, 6.5 x 55 SKAN & 6.5 x 55 Swedish, 270 Win, 270 WSM, 7mm – 08, 7mm Win Short Mag, 280 Rem, 300 Win Mag, 300 Win Short Mag, 308 Win, 30 – 06, 338 Win Mag

• Simply the best straight-line seating die available, and it adapts to most standard reloading presses. Non-crimping style provides accuracy, consistency and perfect alignment.
• Years ago, Forster/Bonanza obtained U.S. Patent #3,440,923 for the design of the original Bench Rest Seater Die. That patent covered the use of a specially machined, close fitting chamber that holds the case, the bullet and the seating stem all in perfect alignment. This innovative chamber design is still the hallmark of our Bench Rest Seater Dies, because it’s the premier system of all the so-called “in-line” seater systems that supports the entire outside diameter of the sized case rather than just the bullet and case neck.
• We have continued to refine our seating stems to better fit newly designed ballistic tips and to match most very low drag (VLD) bullets. Our close fitting chamber (part #P-30) made with one-piece reamers ensures concentricity and accuracy.
• Seater Dies are available in more than 70 calibers, either individually or bundled with a Full Length Die in the Bench Rest Die Set.

17 Rem, 204 Ruger, 22 Hornet, 22 BR, 22 PPC, 221 Fireball, 222 Rem, 222 Rem Mag, 223 Rem, 223 WSSM, 224 Wby Mag, 5.6 x 50 Rimmed, 220 Swift, 22 – 250 Rem, 240 Wby Mag, 243 Win, 243 WSSM, 6mm BR, 6mm Dasher, 6mm PPC, 6mm Rem (244), 6mm XC, 6mm x 45 (6 x 223 Rem), 6 x 47 Lapua, 25 – 06 Rem, 25 WSSM, 257 Wby Mag, 257 Ackley (40°), 257 Roberts, 260 Rem (6.5 – 08), 6.5 x 47 Lapua, 6.5 Creedmoor, 6.5 Grendel, 6.5 – 284, 6.5 x 57 Mauser, 6.5 x 55 Swedish & 6.5 x 55 SKAN, 6.8 SPC, 270 Win, 270 Win Short Mag (WSM), 270 Wby Mag, 7 x 64 Brenneke, 7mm – 08, 7 x 57 Mauser, 7mm BR Rem, 7mm Rem Mag, 7mm Rem Ultra Mag, 7mm Rem Short Action Ultra Mag, 7mm Win Short Mag, 7mm Wby Mag, 7mm STW, 280 Rem (7mm Exp. Rem), 284 Win, 7.62 x 54 Russian, 30 – 30 Win, 300 AAC Blackout, 300 Rem Ultra Mag, 300 Rem Short Action Ultra Mag, 300 Norma Mag, 300 Win Mag, 300 Win Short Mag (WSM), 300 Wby Mag, 30 – 378 Wby Mag, 303 British, 308 Win or 308 National Match, 30 – 06, 325 Win Short Mag (WSM), 8 x 57 Mauser, 8 x 68S, 338 Norma Mag, 338 Win Mag, 340 Wby Mag, 338 Lapua Mag, 375 H & H, 375 Rem Ultra Mag

• No doubt about it: Forster Bench Rest dies set the standard for quality and precision. That’s why they’re the first choice of some of the world’s toughest reloading critics, including members of the U.S. Marines, U.S. Navy Seals, U.S. Army Rangers, U.S. Secret Service, and the U.S. Olympic Shooting Team.
• This set includes a Full Length Sizing Die and a standard Bench Rest Seating Die, made with the superior manufacturing quality that is a proud Forster tradition. It comes packaged in our Deluxe Die Box.

17 Rem, 204 Ruger, 22 Hornet, 22 BR, 22 PPC, 221 Fireball, 222 Rem, 222 Rem Mag, 223 Rem, 223 WSSM, 224 Wby Mag, 5.6 x 50 Rimmed, 220 Swift, 22/250, 240 Wby Mag, 243 Win, 243 WSSM, 6mm BR, 6mm Dasher, 6mm PPC, 6mm Rem (244), 6mm XC, 6mm x 45 (6 x 223 Rem), 6 x 47 Lapua, 25 – 06 Rem, 25 WSSM, 257 Wby Mag, 257 Ackley (40°), 257 Roberts, 260 Rem (6.5 – 08), 6.5 x 47 Lapua, 6.5 Creedmoor, 6.5 Grendel, 6.5 – 284, 6.5 x 57 Mauser, 6.5 x 55 Swedish, 6.5 x 55 SKAN, 270 Win, 6.8 SPC, 270 Win Short Mag (WSM), 270 Wby Mag, 7 x 64 Brenneke, 7mm – 08, 7 x 57 Mauser, 7mm BR Rem, 7mm Rem Mag, 7mm Rem Ultra Mag, 7mm Rem Short Action Ultra Mag, 7mm Win Short Mag (WSM), 7mm Wby Mag, 7mm STW, 280 Rem, 284 Win, 7.62 x 54 Russian, 30 – 30 Win, 300 AAC Blackout, 300 Rem Ultra Mag, 300 Rem Short Action Ultra Mag, 300 Norma Mag, 300 Win Mag, 300 Win Short Mag (WSM), 300 Wby Mag, 30-378 Wby Mag, 303 British, 308 Win, 308 National Match, 308 Small Base, 30-06, 325 Win Short Mag (WSM), 8 x 57 Mauser, 8 x 68S, 338 Norma Mag, 338 Win Mag, 340 Wby Mag, 338 Lapua Mag, 375 H & H, 375 Rem Ultra Mag

• The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications.
• Includes all the popular straight line seating features of the original Bench Rest Seater Die plus an ultra-accurate micrometer for adjusting bullet seating depth
• Micrometer allows fine adjustments in either direction; easily adjustable to .0005″
• Index marks at increments of .001″ are clearly marked
• After you have seated your bullet close to the desired depth and measured it, simply adjust the micrometer stem down to the desired depth and the cartridge will be exactly the length you need
• Eliminates much of the trial and error that was once associated with seating accurate rounds
• Bright, white markings make micrometer easy to read

204 Ruger, 22 Hornet, 22 BR, 22 PPC, 221 Fireball, 222 Rem, 222 Rem Mag, 223 Rem, 223 WSSM, 224 Wby Mag, 5.6 x 50 Rimmed, 220 Swift, 22 – 250 Rem, 240 Wby Mag, 243 Win, 243 WSSM, 6mm BR, 6mm Dasher, 6mm PPC, 6mm Rem (244), 6mm XC, 6mm x 45 (6 x 223 Rem), 6 x 47 Lapua, 25 – 06 Rem, 25 WSSM, 257 Wby Mag, 257 Ackley (40°), 257 Roberts, 260 Rem (6.5 – 08), 6.5 x 47 Lapua, 6.5 Creedmoor, 6.5 Grendel, 6.5 – 284, 6.5 x 57 Mauser, 6.5 x 55 Swedish & 6.55 x 55 SKAN, 6.8 SPC, 270 Win, 270 Win Short Mag (WSM), 270 Wby Mag, 7 x 64 Brenneke, 7mm – 08, 7 x 57 Mauser, 7mm BR Rem, 7mm Rem Mag, 7mm Rem Ultra Mag, 7mm Rem Short Action Ultra Mag, 7mm Win Short Mag (WSM), 7mm Wby Mag, 7mm STW, 280 Rem, 284 Win, 7.62 x 54 R, 30 – 30 Win, 300 AAC Blackout, 300 Rem Ultra Mag, 300 Rem Short Action Ultra Mag, 300 Norma Mag, 300 Win Mag, 300 Win Short Mag (WSM), 300 Wby Mag, 30 – 378 Wby Mag, 303 British, 308 Win or 308 National Match, 30 – 06, 325 Win Short Mag (WSM), 8 x 57 Mauser, 8 x 68S, 338 Norma Mag, 338 Win Mag, 340 Wby Mag, 338 Lapua Mag, 375 H & H, 375 Rem Ultra Mag

• The Forster Bench Rest Bushing Bump Sizing Die brings an advanced precision level to hand loaders by allowing you to precisely control the amount of neck sizing tension in your reloaded cartridge brass. The Die improves accuracy and prolongs case life because the necks are sized down as little as necessary while still “bumping” the shoulder of the case to maintain overall case concentricity and cartridge headspace length. Best of all, it prevents overworking the necks and allows you to control the amount of neck tension for your bullet seating operation.
• Interchangeable bushings are available in 0.001 in. increments to allow the user to customize the amount of neck sizing to adjust for case neck wall thickness. Forster neck bushings are machined to a superior interior finish for “smooth as silk” neck sizing. Order bushings separately.
• Individual dies shown – kits with three bushings per cartridge are also sold.

204 Ruger, 223 Rem., 223 WSSM, 22-250 Rem. (22 Varminter), 243 Win., 243 WSSM, 6mm BR, 6mm PPC, 6×47 Lapua, 25-06 Rem., 25 WSSM, 260 Rem. (6.5—08), 6.5×47 Lapua, 6.5 Creedmoor, 6.5-284, 6.5×55 Swedish, 6.8 SPC, 270 Win., 7mm-08, 7mm Rem. Mag., 300 Win. Mag., 300 Win. Short Mag. (WSM), 308 Win., 30-06

• A top quality, hand polished Forster Bushing Bump Neck Sizing Die to match the caliber of your firearm
• Three standard size bushings, specially selected by the Forster staff
• All bushings are machined to a smooth as silk interior finish.
• Available calibres, 204 Ruger, 223 Rem., 223 WSSM, 22-250 Rem. (22 Varminter), 243 Win., 243 WSSM, 6mm BR, 6mm PPC, 6×47 Lapua, 25-06 Rem., 25 WSSM, 260 Rem. (6.5—08), 6.5 Creedmoor, 6.5×47 Lapua, 6.5-284, 6.5×55 Swedish, 6.8 SPC, 270 Win., 7mm-08, 7mm Rem. Mag., 300 Win. Mag., 300 Win. Short Mag. (WSM), 308 Win., 30-06