• Lock-N-Load Technology lets you switch dies to a new caliber and begin reloading again in seconds. Automatic priming is hands-off and trouble free. The angled frame gives you easier access to your cartridges.
• Lock-N-Load Bushings let you adjust your dies once, then lock the setting into place, for consistent reloads every time.
• The CNC machined die and ram openings create near perfect alignment of the ram and die, so cases are lined up properly with the dies at all times. This precision translates into greater accuracy. The strong, rigid frame also provides the stability necessary for precision reloading.
• With Lock-N-Load, one press can handle multiple calibers with ease. There’s no need to purchase multiple presses so you can leave your dies in place. Your dies will remain exactly as you set them, within their Lock-N-Load Die Bushings.
• The Lock-N-Load® reloading system is a patented quick change bushing system that lets you change dies with a simple flick of the wrist. With Lock-N-Load® technology in your reloading press, you can stop loading, change dies, and start loading another caliber in SECONDS. If you load more than one caliber, Lock-N-Load® will dramatically speed up your reloading efforts.

The Hornady Lock-N-Load Classic Reloading Kit comes with everything you need to turn out high-quality, accurate handloads. You get everything listed here, plus complete instructions. The Hornady Handbook of Cartridge Reloading is especially valuable, with hundreds of rifle and pistol loads for every shooting application.

• Lock-N-Load Classic single-stage press
• Lock-N-Load Powder Measure
• Electronic Scale
• Powder Trickler
• Funnel
• The 9th Edition Hornady Handbook of Cartridge Reloading
• Three Lock-N-Load Die Bushings
• Primer Catcher
• Positive Priming System
• Hand-Held Priming Tool
• Universal Reloading Block
• Chamfering and Deburring Tool
• Primer Turning Plate
• One Shot Case Lube

• The Lock-N-Load AP with NEW EZject system loads at a rate of up to 500 rounds per hour, and features the quickest change-over of any progressive press.
• The Lock-N-Load AP is a professional-grade, auto-indexing, 5-station progressive press that features Our patented Lock-N-Load bushing system as well as a host of other features -- detailed below -- that make it much more attractive than other, more expensive presses, such as the Dillon XL650.

• For handloaders who want “hands-on” accurate control of their powder charges, the Lock-N-Load Quick Trickle provides an excellent way to deliver an initial large volume powder charge with the ability to finish with small precision metering for perfection.
• This versatile powder trickler features hand operated high and low speeds with up to a three-to-one gear ratio.
• Combined with double-sided, sealed ball bearings that prevent stray powder from impeding operation, the Quick Trickle is the smoothest operating powder dispensing tool for your reloading bench.

• Hornady’s Bench Rest Powder Measure gives you all the advantages of Lock-N-Load technology with the added benefit of more precise measuring. That precision comes from a specially designed metering insert and a smaller metering chamber to promote more consistent and uniform filling.
• The micrometer adjustment gives positive reference for metering adjustments and you can install pre-set metering units by simply pushing the button on the outside of the metering chamber.
• There’s no need to drain your powder hopper or disassemble the Powder Measure.
• Simply use the Drain Tube Insert (sold separately) to rapidly and easily return powder to its container. Measurements adjust from 20 to 65 grains.
• ll moving parts have been plated for protection and long life, and the rotor requires NO lubrication.

• Handloaders who prefer a traditional analog scale for powder measurement will love the Hornady® Lock-N-Load® Beam Scale.
• This high tolerance scale is consistent to within 1/10th of a grain.
• The scale can be precisely adjusted to balance the powder pan, and measurements are easy to read on the laser etched beam.
• Made in the U.S.A.

• Make case preparation faster and easier than ever with the new Lock-N-Load Case Prep Trio.
• Its durable brushed aluminum housing and high torque, low speed motor will provide years of dependable use.
• Speed up your case prep process with the 3-tool capacity and utilize the onboard storage for optional accessories like our primer pocket cleaners, primer pocket reamers, case neck brushes and any other 8-32 thread tools.
• With three active stations, you can chamfer, deburr and clean primer pockets without having to change tools. 
• The Lock-N-Load Case Prep Trio comes with both inside diameter and outside diameter chamfer and deburr tools.
• Unit is compatible with 110V or 220V power.
• Made in the U.S.A.

The only tool on the market to combine case prep tools and a power trimmer in one handy unit! Combining essential case prep tools into one handy unit saves reloaders real estate on their benches and valuable time in the reloading process. The Lock-N-Load® Case Prep Center includes a power trimmer, chamfer/deburr tools, primer pocket cleaner and five neck brushes. A primer pocket uniformer, primer pocket remers, and flash hole deburr tools can be purchased separately.

Features

• All-in-one tool includes a power trimmer, chamfer/deburr tools, primer pocket cleaner and neck brushes for the following calibers: 22 cal, 25 cal/6mm, 270 cal/7mm, 30 cal, 35 cal/9mm and 45 cal.
• Innovative design keeps shavings in the catch trays and out of cases.
• Rugged housing and a powerful motor will give years of dependable service.
• Removable trays are easy to detach and provide ample collection space for shavings.
• Use with Hornady Shell Holders and Hornady Trimmer Pilots (sold separately).
• Optional Flash Hole Deburr Tool, Primer Pocket Reamer, Primer Pocket Uniformer and additional Neck Brushes can be purchased separately.